|
| |
|
Decorative Acid Copper Systems
ProBrite Acid Copper
210: Dye Based Decorative Acid Copper
Advantages:
 | Superior throwing power and LCD brightness |
| High temperature operation, 45 degree C, plus |
| Mirror bright, leveled deposit after 5 minutes of plating |
| Excellent coverage and brightness in the LCD |
| High tolerance to over-feeding |
| Easy to trouble shoot |
| Economical, low consumption |
Applications:
| Suitable for rack or barrel operations |
| Suitable for high temperature operations |
| All shapes of parts, all substrates suitable for acid copper plating |
Probrite
Acid Copper DF: Dye Free Decorative Acid Copper
Advantages:
| Dye free system with superior throwing power and metal distribution |
| High temperature operation, 50 degree C, plus |
| Mirror bright, highly leveled deposit after short plating times |
| No decomposition products, therefore, easy to keep in balance |
| High tolerance to over-feeding |
| Economical, low consumption |
Applications:
| Suitable for rack or barrel operations |
| Suitable for high temperature operations |
| All shapes of parts, all substrates suitable for acid copper plating |
(return to top of page)
PRINTED
CIRCUIT BOARD Acid Copper Systems
ProBrite
Acid Copper for Printed Circuit Board Applications
Advantages:
| Developed specifically to match standards of modern multilayer printed
circuit boards with high aspect ratio |
| Excellent metal distribution |
| Uniform appearance of deposit |
| Good ductility and thermal shock resistance |
| High elongation (22%) and low stress (max 25kp/mm2) |
| Suitable for Vertical and Horizontal lines |
| Temperature tolerant up to 40 degrees C |
| Very economical operation costs |
Applications:
| Normal speed plating |
| High speed plating |
| Pulse plating |
(return to top of page)
SPECIALTY ACID COPPER SYSTEMS
ProBrite AC-361/AC-362: Bright acid copper process
for plating grounding
rods
Features:
| Brightener components are fully consumed by electrolysis |
| Additive system contains no tri-cyclic derivatives or dyes |
| Operates at high temperatures above 50 degrees C and amperages |
| Economical |
| Easy control, consistent results, no need for frequent purifications of
the bath |
| Equal bright deposits in the high and mid-current ranges even at low
brightener feed rates |
ProBrite AC-405: Acid copper process for plating
printing cylinders
Features:
| High temperature stability of the brightener system in excess of 50
degrees C |
| Single additive system, easy to control |
| No breakdown products, purification with peroxide or carbon is not
required |
| Thick deposits remain uniformly bright |
| Hardness of approximately 200 Vickers is stable over time |
(return to top of page) |
|
